Industrial 4 Foot Foam Styrofoam Cutting Bow Cutter #050A

Description

Free Shipping
Made in the USA
Quality Customer Service
Quality Foam Cutting Products Since 1991
4 foot Electric Hot Wire Cutter EPS XPS Styrofoam Polystyrene Foam Industrial
New
Hot Wire Foam Factory
#050A
4-Foot Compound Bow Cutter
Proudly Made in the USA!
Includes:
2x4 Compound Bow
Multi-Heat Power Supply (110-230 volt input, works in all countries)
Four 4-foot and four 2-foot cutting wires
10 feet in extension wires (from power to bow)
Printed Instructions
2 Clamps to secure into 2-Foot and 4-Foot mode
5/32 Hex Key for clamps
Features:
Choose 4-foot cutting mode to knock down those big pieces of foam
Choose 2-foot cutting mode for creative sculpting
10 feet of power cord
Starts cutting immediately
Cuts continuously without overheating
Power switch conveniently on the bow
and
on the power supply
Large diameter sturdy yet lightweight body
Comfortable rubber coating
Made with care in the USA
Used For:
Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam
Cutting, slicing, and notching large sheets and blocks of foam
Cutting down insulation foam at building construction sites
Large theatrical and studio props and backdrops
Model airplane wings
Surfboards
Garden décor, like fake boulders and waterfalls
Tech Specs:
The cutting wires will last indefinitely if you follow the instructions
Easy user replaceable cutting wires
Over 4 feet of clearance between arms, 2 feet in 2-foot mode
19 inches clearance from cutting wire to the bow handle
Longer arms for deeper cuts are available
Made of thick industrial strength aluminum and ABS to last a lifetime
Don't quite need something this big?
Check out our
2-Foot Bow Cutter
!
If you have questions we can answer for you, please don't hesitate to contact us.
Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam).
If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.
NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
PAYMENT
SHIPPING
WARRANTY & RETURNS
SUPPORT
PAYMENT
SHIPPING
WARRANTY & RETURNS
SUPPORT
We accept payment by any of the following methods:
PayPal Visa Amex Discover MasterCard
Buyers in California will be charged 7.75% sales tax.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner!
Packages are always insured. We ship Bow Cutters within 3 business days, although we strive for next-day shipping. Shipping example: If you order Monday, your order will ship no later than Thursday. Weekends and holidays do not count as business days. If you need this product faster, please contact us for expediting options.
We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay.
USA
- FedEx & USPS (United States Postal Service)
Canada/Mexico
- USPS (United States Postal Service) International
Worldwide
(Except Hong Kong or China) - USPS (United States Postal Service) International
Limited Warranty & Limitation of Liability Information:
This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of
charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above.
Return Policy:
HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Please message us.
Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying.
Please send a message
(9AM-4PM, PST, Monday through Friday)
New Hot Wire Foam Factory #050A 4-Foot Compound Bow Cutter Proudly Made in the USA! Includes: 2x4 Compound Bow Multi-Heat Power Supply (110-230 volt input, works in all countries) Four 4-foot and four 2-foot cutting wires 10 feet in extension wires (from power to bow) Hangers which can also be used to mount the bow to a wall or workbench ---Printed Instructions Features: Choose 4-foot cutting mode to knock down those big pieces of foam Choose 2-foot cutting mode for creative sculpting 10 feet of power cord Starts cutting immediately Cuts continuously without overheating Power switch conveniently on the bow and on the power supply Large diameter sturdy yet lightweight body Comfortable rubber coating Made with care in the USA Used For: Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam Cutting, slicing, and notching large sheets and blocks of foam Cutting down insulation foam at building construction sites Large theatrical and studio props and backdrops Model airplane wings Surfboards Garden décor, like fake boulders and waterfalls Tech Specs: The cutting wires will last indefinitely if you follow the instructions Easy user replaceable cutting wires Over 4 feet of clearance between arms, 2 feet in 2-foot mode 19 inches clearance from cutting wire to the bow handle Longer arms for deeper cuts are available Made of thick industrial strength aluminum and ABS to last a lifetime Don't quite need something this big? Check out our [2-Foot Bow Cutter] (http://www.ebay.com/itm/2-Foot-Electric-Hot-Wire-Bow-Cutter-EPS-XPS-Styrofoam-Polystyrene-Guillotine-/331360328510?ssPageName=STRK:MESE:IT) ! If you have questions we can answer for you, please don't hesitate to contact us. Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam). If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools. NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
Quality Customer Service
Made in the USA
Fast Shipping
Quality Foam Cutting Products Since 1991
4 foot Electric Hot Wire Cutter EPS XPS Styrofoam Polystyrene Foam Industrial
New
Hot Wire Foam Factory
#050A
4-Foot Compound Bow Cutter
Proudly Made in the USA!
Includes:
2x4 Compound Bow
Multi-Heat Power Supply (110-230 volt input, works in all countries)
Four 4-foot and four 2-foot cutting wires
10 feet in extension wires (from power to bow)
Hangers which can also be used to mount the bow to a wall or workbench
Printed Instructions
Features:
Choose 4-foot cutting mode to knock down those big pieces of foam
Choose 2-foot cutting mode for creative sculpting
10 feet of power cord
Starts cutting immediately
Cuts continuously without overheating
Power switch conveniently on the bow
and
on the power supply
Large diameter sturdy yet lightweight body
Comfortable rubber coating
Made with care in the USA
Used For:
Cutting Styrofoam, white beaded EPS, EIFS and extruded XPS foam
Cutting, slicing, and notching large sheets and blocks of foam
Cutting down insulation foam at building construction sites
Large theatrical and studio props and backdrops
Model airplane wings
Surfboards
Garden décor, like fake boulders and waterfalls
Tech Specs:
The cutting wires will last indefinitely if you follow the instructions
Easy user replaceable cutting wires
Over 4 feet of clearance between arms, 2 feet in 2-foot mode
19 inches clearance from cutting wire to the bow handle
Longer arms for deeper cuts are available
Made of thick industrial strength aluminum and ABS to last a lifetime
Don't quite need something this big?
Check out our
2-Foot Bow Cutter
!
If you have questions we can answer for you, please don't hesitate to contact us.
Our Hot Wire tools work best on rigid polystyrene foams, also known as expanded polystyrene (also known as EPS, Styrofoam or bead-board foam) and extruded polystyrene foam (also known as XEPS or XPS or insulation foam).
If you are unsure whether or not this tool will cut the foam you intend to cut, please contact us before buying. The Hot Wire tools will cut many kinds of foam, but always check with the foam manufacturer to make sure there are no health or safety hazards when using hot wire tools.
NOTE: Polyurethane foam (aka upholstery foam) should not be cut with hot wire tools. It needs a ton of heat, gives off toxic fumes, and leaves a lot of melted plastic wherever it is cut. We recommend that the polyurethane foams only be cut with a blade or saw.
PAYMENT
We accept payment by any of the following methods:
PayPal Visa Amex Discover MasterCard
Buyers in California will be charged 7.75% sales tax.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner!
SHIPPING
Packages are always insured. We ship Bow Cutters within 3 business days, although we strive for next-day shipping. Shipping example: If you order Monday, your order will ship no later than Thursday. Weekends and holidays do not count as business days. If you need this product faster, please contact us for expediting options.
We are not responsible for any customs fees, duties, taxes or tariffs imposed by the destination country which you may have to pay.
USA
- FedEx & USPS (United States Postal Service)
Canada/Mexico
- USPS (United States Postal Service) International
Worldwide
(Except Hong Kong or China) - USPS (United States Postal Service) International
WARRANTY & RETURNS
Limited Warranty & Limitation of Liability Information:
This product is warranted for non-commercial use as follows: For 90 days from the original date of purchase, HWFF, Inc. will, at its option, repair or replace a defective unit free of
charge, if the unit is defective due to an original manufacturer’s defect. This warranty covers normal use and does not cover damage which occurs in shipment or unit failure which results from alteration, accident, misuse, abuse, or neglect. Except as herein expressly set forth, HWFF, Inc. shall not under any circumstances be responsible for any direct, indirect, incidental, or consequential damage resulting from the use of the equipment. The consumer’s sole remedy shall be such repair or replacement as expressly provided above.
Return Policy:
HWFF, Inc. retains the exclusive and sole right as to whether an item may be returned, exchanged, or order cancelled. HWFF, Inc. thus encourages customers to use caution when placing an order, as once placed the order cannot be cancelled, nor the item returned or exchanged unless HWFF, Inc. expressly consents. In order to obtain a refund or exchange, prior approval must be given by HWFF, Inc.. Please message us.
Generally, HWFF, Inc. will consider returns within thirty (30) days of purchase with a 20% restocking charge. Refunds are for the cost of product only; shipping and handling charges are not refundable. Buyer is responsible for return shipping. Please ask any questions you may have prior to buying.
SUPPORT
Please send a message
(9AM-4PM, PST, Monday through Friday)