Dental Unit Chair Hard Leather Computer Controlled +4Hole Handpiece Kit

Description

Dental Unit Chair Hard Leather Computer Controlled
Dental Unit Chair Hard Leather Computer Controlled
Description：
Before you buy,please read the following information carefully:
Δ First ,The dental unit must be sent via ocean shipping(you need to offer a local port) because of its weight.
ΔSecond, After everything we talked about is cleared, we will order it from the manufacturers.
ΔThird,Sometimes we need to wait because of so many orders from factory. And sometimes we need to wait the shipping. All of these will take about many days, it usually costs about 20 days.
ΔThe most important, when the item arrives,it need to make the custom clearance for ocean shipping. as buyer ,you need pick it up from the port by yourselves.
Import duties, taxes and charges are not included in the item price. These charges are the buyer responsibility
Standard Accessories:
All controlled by the electric valve
DC Motor
Automatic thermostatic water supply system
Compensate Wider Dental Unit
Handpiece tubing with standard fittings (3sets)
Three way springe (one for hot ,one for cold)(2sets)
Water suction and saliva ejector (1set)
Powerful suction (HVE) apparatus (1set)
Easy cleaning Integral ceramic spittoon
Built-in Water purified system with bottle
Strong and weak dual-purpose operation light (1set)
Low-tension X-film viewer (1set)
Spirit lock tight Equilibrium Device
Doctor stool (1set)
Suitable for adult and children headrest
Foot pedal (1set)
Gross weight: 200 Kg
Specifications:
Model: TJ2688 A1
Supply Voltage (110V 60Hz or 220V 50Hz )
Air Pressure (＞0.55Mpa)
Water Pressure (0.2Mpa-.04Mpa)
Lowest position of Dental chair (440mm)
Highest position of Dental chair (860mm)
Highest smallest angle of Dental Chair ( 5°)
Lowest smallest angle of Dental Chair ( 85°)
Dental
High & Low Speed Handpiece Kit
Specification:
High speed handpiece
Description:
Standard Push button type, high speed handpiece, Single-way water spray
Needle Change Type
Push button
Air Pressure
180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure
198Kpa (2 kg)
Rotation Speed
370,000-420,000 rpm
Head Hight
13.14 mm
Head Diameter
φ
11.2 mm
Bur Applicable
φ
1.59mm~
φ
1.6mm
×
21mm~23mm (diameter
×
length)
Noise
≤
70dB
Low speed kits Features:
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135
°
C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135
°
C
- For any lab or E-type motors
Straight Nosecone
- Working pressure: 0.3MPa ;
- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise:
≤
68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Mortor
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 4 Hole
-
Max speed 20,000 min-1
Specifications
Air-in Pressure(kg/c
㎡
)
Motor Rotation(rpm)
Air Wastage:(N1/min)
2.5
22,000
42
3
25,000
51
4
27,000
72
Packing List:
- High speed handpiece push button 4 Holes : 2 each
- E-type air motor 4-Holes: 1 each
- Straight nose cone: 1 each
- Contra Angle handpiece: 1 each
- Water spray nozzle: 1 each
- Oil spray nozzle: 1 each
- CAP Spanner: 1 each
Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Payment
We accept PayPal Only!
All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.
Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Shipping
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal.
About Us
Service is our #1 priority at BAISTRA!
If you tell us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.
We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!