Cam Gear Retaining Tool J-35652-A fits for Detroit Diesel 60 Series M30116

Description

Features:
1. Fitment: Suitable for Detroit Diesel Series 60 engines.
2. Function: This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
3. Great Design: The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
4. Direct Replacement: Alternatives to J-35652-A.
5. 100% Satisfaction Guarantee: We aim to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.
Welcome to Anvalee Auto
Your Best Aftermarket Partner
Cam Gear Retaining Tool J-35652-A fits for Detroit Diesel 60 Series Alternative to OEM M30116
Features:
1. Fitment: Suitable for Detroit Diesel Series 60 engines.
2. Function:
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
3. Great Design:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
4. Direct Replacement: Alternatives to J-35652-A.
5. 100% Satisfaction Guarantee:
We aim to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.
Product Description:
Detroit Diesel 60 Series Cam Gear Retaining Tool J-35652-A Alternative to OEM M30116
Fitment:
Suitable for Detroit Diesel Series 60 engines.
Alternatives to J-35652-A.
Function:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
How to Use:
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A part of J 35652 , through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly to position the camshaft drive gear holding tool so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool, J 35652-A part of J 35652 to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case.
Package Includes:
1 x Cam Gear Retaining Tool
Item Specifics
Brand
ANVALEE
Type
Cam Gear Retaining Tool
Interchange Part Number
M30116
Warranty
1 Year
OE/OEM Number
J-35652-A
Manufacturer Part Number
VAQP506001
Fitment
for Detroit Diesel Series 60 engines
Payment
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your Ebay address.Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
Shipping
1. Item will be shipped out
within 1-2 business days
after clear payment received.
2. Please make sure shipping address on your Ebay account is
correct & up-to-date
.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us
via ebay using "Contact member" if you cannot get your order in time.
Returns
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee
.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Contact Us
Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.Thank you for your understanding.
Our
office hours is as below:
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.
Please include your ebay item number or order number in all communications.
Welcome to Anvalee Auto
Your Best Aftermarket Partner
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Shop Category
Store Home
Air Intake & Fuel Delivery
Boat Parts
◈  Outboard Engines & Components
◈  Inboard Engines & Components
◈  Controls & Steering
◈  Other
Car & Truck Parts
◈  Jeep
◈  Dodge
◈  Ford
◈  Toyota
◈  Others
◈  Rear View Monitors/Cams & Kits
Engines & Components
◈  Camshafts, Lifters & Parts
◈  Crankshafts & Parts
◈  Oil Pumps
◈  Pistons, Rings, Rods & Parts
◈  Timing Components
◈  Other
Hand Tools
◈  Other Automotive Hand Tools
◈  Pullers & Extractors
◈  Sockets & Socket Sets
◈  Wrenches
◈  Other
Home & Garden
◈  Generator Parts & Accessories
◈  Washer & Dryer Parts
◈  Blacksmithing
◈  Other
Jeep Wrangler JK
◈  Interior
◈  Exterior
Jeep Wrangler JL
◈  Interior
◈  Exterior
Tools & Supplies
◈  Dent Repair Kits & Tools
◈  Fuel Pressure Testers
◈  Other Auto Tools & Supplies
◈  Jacks & Jack Stands
◈  ATV, Side-by-Side & UTV Parts
◈  Cooling Systems
▷  Filters
♢  Fuel Filters
♢  Oil Filters
◈  Gasket
◈  Transmission & Drivetrain
◈  Turbo Chargers & Parts
◈  Other
Other
Hot Item
66834 Universal Mini Valve Spring Pressure Tester Gauge 0-700PSI 0-50 KG/CM2
USD 75.99
66835 Mini Valve Spring Tester, 0-300 lbs./in. Range, 5LB Increments, Universal
USD 75.99
HW0107 Valve Stem Seal Pliers Seal Removal Tool Remover
USD 16.99
New List Item
Help & Info
Cam Gear Retaining Tool J-35652-A fits for Detroit Diesel 60 Series Alternative to OEM M30116
Features:
1. Fitment: Suitable for Detroit Diesel Series 60 engines.
2. Function:
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
3. Great Design:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
4. Direct Replacement: Alternatives to J-35652-A.
5. 100% Satisfaction Guarantee:
We aim to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days, no questions asked money back guarantee with 12 months’ warranty.
Product Description:
Detroit Diesel 60 Series Cam Gear Retaining Tool J-35652-A Alternative to OEM M30116
Fitment:
Suitable for Detroit Diesel Series 60 engines.
Alternatives to J-35652-A.
Function:
The tool is designed to be installed in the gearbox and mesh with a shock-absorbing hole in the camshaft drive gear.
This tool is used to correctly keep the cam device fixed without damage while removing/installing the cam device fixing bolt.
How to Use:
1. Insert the shoe of the camshaft drive gear torque holding tool, J 35652-A part of J 35652 , through a lightening hole of the camshaft drive gear.
2. Using the 3/4 in. square hole in the center of the crankshaft pulley, bar the engine over slightly to position the camshaft drive gear holding tool so that the bolt holes in the holding tool align with the access cover bolt holes in the gear case cover.
3. Install the camshaft drive gear torque holding tool, J 35652-A part of J 35652 to the gear case, engaging one of the lightening holes in the camshaft drive gear. Use two of the access cover bolts to secure the tool to the gear case.
Package Includes:
1 x Cam Gear Retaining Tool
Payment
Shipping
Returns
Contact Us
1. Payment methods accepted:
Payoneer
.
Our Payoneer account allows you to pay by credit card, debit
card and your paypal balance.
2. All major credit cards are accepted through our secure payment processor Payoneer.
3. We ship items to Your Ebay address.Please make sure your
Ebay
address is correct
before you pay, cause it cannot be changed once the order shipped out.
1. Item will be shipped out
within 1-2 business days
after clear payment received.
2. Please make sure shipping address on your Ebay account is
correct & up-to-date
.
3. All of our items are shipped from our US warehouse.
4. Please feel free to contact us
via ebay using "Contact member" if you cannot get your order in time.
1. Return to us
within 30 days
from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all non seller mistake returns for refund are subject to
20% re-stocking fee
.
3. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Please contact us via ebay using"Contact member".
We will respond within 1 business day or less.Thank you for your understanding.
Our
office hours is as below:
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.
Please include your ebay item number or order number in all communications.
All rights reserved.